-
Standard Bolt Stop ( Any Remington Cut, Guardian Cut, XM Cut, Medium WSM and Badger (Detachable) ) Extended Bolt Stop ( Any Wyatt's Cut, Seekins ( Detachable Extended ) and Rigby cut. Kit Contains a bolt stop of your choosing, Spring and Pin. -
3 Long Scope screws and 1 short scope screw (all screws 8-40) for very front of action near threads. Two pins; one long for rear one short for front. Torqued to 20 inch pounds from factory, no Loctite applied. -
CompareDeviant - The rifle action that sets the bar for custom rifle actions.
The Deviant rifle action is the action we are known for. A rugged and reliable receiver made of a single piece of pre-hardened aerospace grade stainless steel with an integral rail and lug. It is paired with Defiance's legacy bolt, a one-piece bolt that features a swept handle, enhanced firing pin design, and a smoothness you have to cycle to understand. The Deviant has five unique models to choose from, determined by their scope mount configuration: the Deviant, Deviant Hunter, Deviant GA Hunter, Deviant Tactical and Deviant Ultralight. These configurations allow you to make an ultra lightweight hunting action, a heavy duty tactical action, or something in between depending on your preferences.Specifications
- Integral scope mount/rail.
- Integral recoil lug.
- Defiance swept legacy bolt design.
- Smooth chrome-moly bolt action with anti-bind design.
- Recessed bolt lugs, Mini-16 extractor, and plunger ejector.
- Available with AW magazine cuts (short actions only).
- Trigger pins included.
Why choose the Deviant?
- Integral rail and recoil lug means more rigidity and reliability when it matters most.
- Receiver is made from once piece of pre-hardened aircraft-certified 416 stainless steel, allowing for tight manufacturing tolerances and increased performance.
- One-piece legacy bolt, machined to exacting tolerances required to cycle as smooth as possible.
- Swept bolt handle design to allow plenty of clearance with your rifle scope.
- Precision extraction system that significantly increases initial extraction and improves smooth bolt cycling.
Need an extra bolt?
Extra bolts are available when purchasing your action over the phone with our team for $495 each (includes extractor, ejector, and fire control assembly). -
anTi / Tenacity Scope Rail made of 303 stainless steel - Military Spec 1913
- Available in Defiance Action Lengths:
- Short (Rem. 700 Short Action Length)
- XM (Proprietary Intermediate Length)
- Medium (Industry Standard Medium, previously named XM Plus)
- Long (Rem. 700 Long Action Length)
- Includes (4) 8-40 screws and (2) 1/8" hardened dowel pins
-
CompareThe Misfit - Sets Itself Apart From Other Entry Level Actions
The Misfit is the ideal action for an entry level shooter looking to make their first custom rifle on a budget. Built using the same aircraft-certified materials and processes as our other steel actions, but with a limited set of features and options, we are able to streamline our production and reduce costs to allow for a great price point without compromising quality or capability in any way.Approximate Weights
- 28.1 oz – Short (Rem. SA).
- 30.4 oz – Long (Rem. LA).
Specifications
- Guaranteed headspace.
- Integral recoil lug.
- Aluminum scope mount/rail.
- Chrome-moly bolt with anti-bind design for smooth cycling.
- Recessed bolt lugs, Mini-16 extractor, and plunger ejector.
- Available with AICS/AW magazine cuts (AW on short actions only).
- Trigger pins included.
Why choose the Misfit?
- Premium level quality at an entry level price point.
- Bolt and receiver materials are pre-hardened and tempered for high strength, toughness, and rigidity.
- Receiver is made from once piece of aircraft-certified 416 stainless steel, allowing for tight manufacturing tolerances and increased performance.
- Bolt is made from 4340 chrome moly in one operation, enabling guaranteed headspace (+/- .001″) that works with Ruckus style pre-fit barrels.
- Precision extraction system that significantly increases primary extraction and improves smooth bolt cycling.
Need an extra bolt?
Extra bolts are available when purchasing your action over the phone with our team for $495 each (includes extractor, ejector, and fire control assembly). -
anTi / Tenacity Scope Rail made of 7075 Aluminum - Military Spec 1913
- Available in Defiance Action Lengths:
- Short (Rem. 700 Short Action Length)
- XM (Proprietary Intermediate Length)
- Medium (Industry Standard Medium, previously named XM Plus)
- Long (Rem. 700 Long Action Length)
- Includes (4) 8-40 screws and (2) 1/8" hardened dowel pins
-
CompareTi X - The epitome of lightweight and performance.
The Ti-X is Defiance’s interpretation of “ounces equal pounds” with a short action weighing only 16.8 ounces and a long action weighing only 18.1 ounces. Machined from aerospace-grade Titanium, the receiver includes an integral scope rail, recoil lug and a 4340-chrome moly bolt with aluminum shroud. The Ti-X also features full DLC coating to ensure you will experience maximum smoothness, reliability and repeatability that you have come to expect from Defiance. Premium Materials. No compromises.Approximate Weights
- 16.8 oz – Short (Rem. SA).
- 17.4 oz – Medium (Industry Standard Medium, previously named XM Plus).
- 18.1 oz – Long (Rem. LA).
Specifications
- Guaranteed headspace.
- Titanium receiver with lightening cuts.
- Integral scope mount / rail.
- Integral recoil lug.
- Defiance straight bolt handle design, available in 90 or 75 degree angle.
- Smooth chrome-moly bolt with anti-bind design.
- Recessed bolt lugs, Mini-16 extractor, and plunger ejector.
- Available with AICS/AW magazine cuts (AW on short actions only).
- Trigger pins included.
- Includes DLC (Diamond Like Coating) finish on receiver and nitride finish on bolt.
Why choose the Ti X?
- Lightweight design and materials.
- Integral scope mount / rail and integral recoil lug means more rigidity and reliability when it matters most.
- Receiver is made from once piece of aerospace-grade Ti-6AL-4V Titanium, allowing for tight manufacturing tolerances and increased performance.
- Bolt is made from 4340 chrome moly in one operation, enabling guaranteed headspace (+/- .001″) that works with Ruckus style pre-fit barrels.
- One-piece bolt with straight handle, machined to exacting tolerances required to cycle as smooth as possible.
- Precision extraction system that significantly increases initial extraction and improves smooth bolt cycling.
- DLC (Diamond Like Coating) finish on receiver and nitride finish on bolt ensures longevity and smoothness.
Need an extra bolt?
Extra bolts are available when purchasing your action over the phone with our team for $495 each (includes extractor, ejector, and fire control assembly). -
Remington-style Bolt Shroud- Manufactured by Defiance Machine
- Made to Defiance specifications
- May not fit in other actions
-
These kits are used to replace your Extractor when the time comes. Ejection Port side does not matter. Good kits to have in your competition bag. Plate Extractor, Spring, and Plunger Cap Cone bolt nose only. -
CompareanTi - When weight matters.
If you watch your scales as closely as you watch your targets, check out the Defiance anTi action—a minimalist take on Defiance’s legendary precision actions. It features lightening cuts, a lightweight bolt, guaranteed headspace, a detachable rail for direct mounting, and an integral lug. The receiver is made with only the highest quality pre-hardened aircraft-grade 416 stainless steel and paired with a chrome moly bolt. Innovative weight reduction. Premium Materials. No compromises.Approximate Weights (with standard 2 piece rail configuration)
- 23.5 oz – Short (Rem. SA) action with 2-piece aluminum rail.
- 24 oz – Medium (Industry Standard Medium, previously named XM Plus) action with 2-piece aluminum rail.
- 24.3 oz – Long (Rem. LA) action with 2-piece aluminum rail.
Specifications
- Guaranteed headspace.
- Detachable aluminum scope mount/rail (1 and 2 piece options available).
- Integral recoil lug.
- Smooth chrome-moly bolt action with anti-bind design.
- Recessed bolt lugs, Mini-16 extractor, and plunger ejector.
- Available with AICS/AW magazine cuts (AW on short actions only).
- Trigger pins included.
Why choose the anTi?
- Lightweight design that rivals titanium actions when it comes to weight, but with the dependability that steel is known for.
- Detachable rail for direct mounting scope for even lighter configuration.
- Integral recoil lug means more rigidity and reliability when it matters most.
- Receiver is made from once piece of pre-hardened aircraft-certified 416 stainless steel, allowing for tight manufacturing tolerances and increased performance.
- Bolt is made from 4340 chrome moly in one operation, enabling guaranteed headspace (+/- .001″) that works with Ruckus style pre-fit barrels.
- Precision extraction system that significantly increases initial extraction and improves smooth bolt cycling.
Need an extra bolt?
Extra bolts are available when purchasing your action over the phone with our team for $495 each (includes extractor, ejector, and fire control assembly).
de-fy
/dəˈfī/
verb
OPENLY RESIST OR
REFUSE TO OBEY.
3881 Montana Highway 40 West
Columbia Falls, MT 59912
Phone 406.756.2727
Fax 406.756.2733
Find Out More
Support
My Account
© Copyright 2026 Defiance Machine, Inc. | This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.